↓ Archives ↓

TVP5150 Board Schematic

If you’re interested, I’m posting the schematic of the TVP5150 board, as it ships.  Remember that connector J2 is not populated, but you can get the connector from digikey and install it yourself if you’re looking for an easy way to access the UART which appears there.  Resistors R4 and R2 are zero ohm resistors which you can remove if you don’t have a revision 1.5 leopard board.

As before, you can order a tvp5150 board by clicking here.

TVP5150 board schematic

No Comment

Leave a Reply

Sorry, comments are closed.